Image 4: Setting the temperature limit (before/after)
￭
Pull the control knob off the central plate so that the adjustment rings are vis-
ible Bild.
Pulling off is done by hand or with a suitable tool, e.g. vacuum lifting tool or
key cap puller.
￭
Turn the large blue adjustment ring clockwise to the desired minimum temper-
ature. Each notch corresponds to a change of about 2 °C.
￭
Turn the small red adjustment ring anticlockwise to the desired maximum tem-
perature.
The respective adjustment ring can only be turned in one direction. To return
to the original setting, continue turning to the respective position.
￭
Replace the control knob, observing the coding (Fig. 4, bottom) of the control
knob and rotary axle.
8
Technical data
Rated voltage
AC 220 ... 240 V ~
Floor thermostat
8 / 9
82404903
16.09.2022
J0082404903
