Figure 2: Connection example
o
Connect load as shown in the connection example (figure 2).
o
Insert the actuator in the appliance box in such a way that the
Prog
button and status LED
are visible.
Figure 3: Operating mode switch
Switch position
Function
PC
Operating mode and parameter set with eNet
server.*)
H
t
Commissioning - determine running time
I
t
Commissioning - determine slat time
O
Blind operating mode
P
Operating mode rolling shutter, awning
*)
If the operating mode switch is turned from the position
PC
to another operating mode, the
parameters are set to the default setting. The settings made with the eNet Server will be
lost.
o
Set the operating mode switch.
o
Switch on mains voltage.
i
The load can be switched by briefly pressing the Prog button.
Status LED lights up: output switched on
Status LED off: output switched off
o
Perform commissioning.
3/11
82581443
J0082581443
24.03.2017
eNet radio blinds actuator 1-gang mini
