o
Push the single-stranded cable into the round opening on the installation side up to the
stop (figure 7).
5.2 Commissioning
i
Observe the instructions for the radio transmitter.
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
During commissioning, cover the parts carrying voltage on radio transmitters
and actuators and in their surrounding area.
Teaching a radio transmitter
i
If all memory slots of an output are occupied, a radio transmitter which has already been
taught must first be deleted. To do this, delete all taught channels and light scenes of the
radio transmitter individually.
The distance between the receiver and the radio transmitter is from 0.5 m to 5 m.
Load is switched off.
o
Press the programming button for approx. 4 seconds.
LED flashes red Device switches the connected loads off and is in programming mode for
output A for approx. 1 minute.
i
To enter the programming mode for output B, press programming button again for
4 seconds. LED flashes green
o
Trigger teach telegram on radio transmitter, see instructions for radio transmitter.
LED lights up red for output A or green for output B.
The radio transmitter has been taught.
o
Press the programming button briefly.
The load switches on. The device is in operating mode.
i
The programming mode is exited automatically after about 1 minute.
i
Only switch actuator: When a radio transmitter is taught, All On and All Off buttons that are
present are automatically also taught.
i
Only switch actuator: Teach light scene push-buttons separately.
Deleting radio transmitters individually
o
Teach the radio transmitter to be deleted again (see Teaching the radio transmitter).
LED flashes quickly in the colour corresponding to the output. The radio transmitter has
been deleted.
i
If several channels or light scenes of a radio transmitter have been taught, they all must be
deleted individually.
6 Appendix
The icon confirms the conformity of the product to the relevant guidelines.
6.1 Technical data
Rated voltage
AC 230 / 240 V ~
Mains frequency
50 / 60 Hz
Ambient temperature
-20 ... +55 °C
Relative humidity
approx. 0 ... 65 % (No moisture condensation)
Total power consumption
max. 2300 W/VA
Connected load per output
Incandescent lamps
2300 W
HV halogen lamps
2300 W
6/7
82534823
J:0082534823
12.02.2013
Radio Management
Radio actuator, 2-channel, flush-mounted