3 Function
System information
By statute, the transmitting power, the reception characteristics and the antenna cannot be
changed.
The device may be operated in all EU and EFTA countries.
The declaration of conformity can be viewed on our website.
The range of a radio system from the transmitter to the receiver depends on various
circumstances.
The range of the system can be optimised by selecting the optimal installation location, taking
into account the structural circumstances.
Figure 2: Reduced range due to structural obstacles
Example of penetration of various materials:
Material
Penetration
Wood, Plaster, Plasterboard
approx. 90%
Brick, Chipboard
approx. 70%
Reinforced concrete
approx. 30%
Metal, Metal grid
approx. 10%
Rain, Snow
approx. 1-40%
Intended use
-
Radio-controlled switching of incandescent lamps, fluorescent lamps, HV halogen lamps
and Tronic or inductive transformers with halogen lamps
-
Operation with suitable radio transmitters
-
Suitable for mixed operation up to the specified output (Technical data)
-
Mounting in appliance box according to DIN 49073
i
It is not possible to teach a combination of presence detector and motion detector.
Product characteristics of the switch actuator
-
Independent switching of two electrical loads
-
Light scene operation possible
-
2-point light control in combination with a radio presence detector possible
-
Run-on time of approx. 1 minute in connection with radio motion detectors.
2/7
82534823
J:0082534823
12.02.2013
Radio Management
Radio actuator, 2-channel, flush-mounted