Planning, installation and commissioning of the device are carried out with the aid of KNX-
certified software. Full functionality with KNX commissioning software version ETS3.0d
onwards.
An updated version of the product database, technical descriptions and conversion programs
and other auxiliary programs are available on our Internet website.
Intended use
-
Controlling of luminaires and other applications with DALI operating device in KNX
installations e.g. electronic ballast
-
Installation on DIN rail according to EN 60715 in distribution boxes
Product characteristics
-
Control of up to 64 DALI devices in up to 32 groups
-
16 light scenes
-
Read out DALI device state via KNX, e.g. brightness or luminaire error
-
Manual operation of the DALI groups
-
Restraint
-
Feedback of switching state and brightness value in bus and manual mode
-
Central switching function
-
Disabling function for each DALI group
-
Separate ON and OFF delay
-
Staircase lighting timer with run-on time
-
DALI commissioning with ETS plug-in
-
Short circuit protection
-
Surge protection
-
Overload protection
-
An individual DALI device can be exchanged during operation without software.
i
Delivery state: construction site mode, the DALI groups can be operated using button field.
All DALI devices are controlled jointly.
4 Operation
Operating elements
picture 2
(4) DALI group display (1...32)
(7) Button
c
– Manual control
(8) LED
c
– On: Continuous manual mode active
(9)
ON/
n
button – switch on or increase brightness
(10)
ON/
n
LED – On: DALI group switched on, brightness 1...100 %
(11)
OFF/
o
button – switch off or dim darker
(12) LED
OFF/
o
– On: DALI group switched on, brightness 0 %
(13)
ALL OFF
buttons – Switch off all DALI groups
2/8
82559913
J:0082559913
16.08.2010
DALI gateway
