o
Operate output with
ON/
n
or
OFF/
o
button.
Short: switch on/off.
Long: dim brighter/darker.
Release: Stop dimming.
The LEDs
ON/
n
and
OFF/
o
indicate the status.
i
Short-term manual operation: After running through all of the DALI groups the device exits
manual mode after another brief press.
Switch off all DALI groups
The device is in continuous manual mode.
o
Press the
ALL OFF
button.
All DALI groups switch off.
Disabling individual DALI groups
The device is in continuous manual mode.
o
Press
c
button briefly as many times as necessary until the display shows the desired
DALI group.
Status display via LEDs
ON/
n
and
OFF/
o
.
o
Press buttons
ON/
n
and
OFF/
o
simultaneously for at least 5 seconds.
The number of the selected DALI group flashes in the display (4).
The DALI group is blocked.
o
Activate bus mode (see section Deactivating permanent manual control).
i
A blocked DALI group can be operated in manual mode,
Re-enabling DALI groups
The device is in continuous manual mode.
o
Press
c
button briefly as many times as necessary until the display (4) flashes with the
desired group.
o
Press buttons
ON/
n
and
OFF/
o
simultaneously for at least 5 seconds.
Selected DALI group is enabled.
The display (4) no longer flashes.
o
Activate bus mode (see section Deactivating permanent manual control).
5 Information for electrically skilled persons
5.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live
parts in the working environment.
Fitting the device
Observe the temperature range. Ensure adequate cooling.
o
Mount device on DIN rail. Output terminals must be at the top.
4/8
82559913
J:0082559913
16.08.2010
DALI gateway
