KNX/EIB
Product documentation
Page: 21 of 29
Hardware description
Function: Dimming
Function of status LED
as status indicator
as key-press indicator
always off
always ON
Defines the operation of the status LED.
The status LED indicates the status of the
switching object.
The status LED light up when a key is pressed.
The status LED is always off.
The status LED is always on
LED ON-time
0.5 s; 1 s;
2.1 s
; 4.2 s; 8.4 s
Defines the time during which the status LED is
on when a key is pressed.
Only if "Status LED function = key-press
indicator").
Key function
1/3 = brighter(ON)
2/4 = darker(OFF)
1/3 = darker(OFF)
2/3 = brighter(ON)
Defines the command transmitted on pressing
of the keys.
Time between switching
and dimming, base
130 ms
; 260 ms; 520 ms;
1 s; 2.1 s; 4.2 s; 8.4 s; 17 s; 34 s
1.1 min; 2.2 min; 4.5 min; 9 min;
18 min; 35 min;
1.2 h
Defines the time base for a key-press to send a
telegram
Time = base
•
factor
Time between switching
and dimming, factor
(2...127)
2 ... 127;
3
Defines the time factor for a key-press to send a
dimming telegram
Time = base
•
factor
Presetting: 130 ms
•
3 = 390 ms
Increase brightness by
100 %
50 %
26 %
12.5 %
6 %
3 %
1.5 %
Defines the maximum dimming step performed
on reception of a relative dimming telegram
(brighter).
Reduce brightness by
100 %
50 %
26 %
12.5 %
6 %
3 %
1.5 %
Defines the maximum dimming step performed
on reception of a relative dimming telegram
(darker).
Send stop telegram ?
YES
NO
Defines whether a dimming procedure in
progress is to stop when the key is released
(YES).
Software remarks
•
For editing all of the parameters, the access must be set to "full access".
•
The status LED indicates either the current status of the switching object or a key-press. If a key is pressed
(e.g. ON) and if the push button sensor does not get a positive acknowledgement (IACK) from an addressed
actuator, the object status is updated and the corresponding status LED is lit up.
