![Jung 2072 TSM Product Manual Download Page 18](http://html1.mh-extra.com/html/jung/2072-tsm/2072-tsm_product-manual_2031548018.webp)
KNX/EIB
Product documentation
Page: 18 of 29
Hardware description
Send stop telegram ?
YES
NO
Defines whether a dimming procedure in
progress is to stop when the key is released
(YES).
Function: Shutter
Key function
1/3 = UP, 2/4 = DOWN
1/3 = DOWN, 2/4 = UP
Defines the command transmitted on pressing
the keys.
Number of steps before
continuous run (1...30)
1 ... 30;
1
A short-time telegram (STEP) permits adjusting
the slats of a shutter.
This parameter defines how many short-time
telegrams are transmitted before a continuous
run (MOVE) after a long key-press.
Time between two
telegrams, base
0.5 ms; 8 ms;
130 ms
2.1 s; 33 s
Defines the time base between two telegrams.
(Time between STEP – STEP or between STEP
– MOVE)
Time = base
•
factor
Time between two
telegrams, factor (2...255)
2 ... 255;
10
Defines the time factor between two telegrams.
(Time between STEP – STEP or between STEP
– MOVE)
Time = base
•
factor
Presetting: 130 ms
•
10 = 1.3 ms
Software remarks
•
For editing all of the parameters, the access must be set to "full access".
•
The status LED indicates either the current status of the switching object or a key-press. If a key is pressed
(e.g. ON) and if the push button sensor does not get a positive acknowledgement (IACK) from an addressed
actuator, the object status is updated and the corresponding status LED is lit up.