Step 8
Snap in the buckles on the top of the
“Enclosure Netting”
Attach the top snap in buckles for all sets of tube frame.
Please make sure the cap holder is facing outwards.
to the “Tube
Cap”
as shown.
Step 9
First, tie the
end of one “Cord” E to the Trampoline Mat ribbon. Then pull the cord through the
corresponding hole on the net as shown. Repeat this step until you have tied all the “Cords” E
to the Trampoline Mat ribbon and tie both ends together.
Step 8
Buckle
Step 10
Zip
Step 9
Step 10
Pull the zip of the “Enclosure Netting” F at the door which should be located between two leg
bases of the trampoline, then snap two buckles as shown.
Step 11
Important: Remember to go back and tighten all screws, nuts and buckles on both the Trampoline
and the Enclosure Netting. Otherwise it may not function properly and may lead to injuries that
could have been avoided by proper assembly.
The assembly of the trampoline is now complete. Remember to be careful when jumping.
F
C
9
