8
ASSEMBLY
Step 6: Assembling the enclosure net
Note:
The edge with pre-sewn loops is the upper part of the enclosure net.
•
Locate a position for the entrance of the trampoline and hang the pre-sewn loop closest to the opening
onto the ball cap (12).
•
Hang the rest of the pre-sewn loops around the remaining five ball caps (12).
•
Attach the bottom end of the enclosure net (10) to the trampoline bed using the existing bed springs.
•
Align the eyelets of the enclosure net (10) with the V-rings of the bed and untie one of the springs
using the hook tool.
Note:
It is essential to select the closest eyelet to its respective V-ring. Even small
misalignments may cause problems with proper assembly.
•
Guide the spring through the enclosure net’s eyelet and the trampoline bed’s V-ring and reattach the
spring to the trampoline frame. Repeat the same steps for each spring in a clockwise direction.
Eyelet
Trampoline
mat
Enclosure
net
084-0263-Cantire-14 ft Trampoline Enclosure-GB-01.indd 8
11-10-20 ��5:48
