5
ASSEMBLY
Place all parts from the box in a cleared area and position them on the floor in front of
you. Remove all packing materials and place them back into the box. Do not dispose
of the packing materials until assembly is completed. Read each step carefully before
beginning any assembly and make sure you understand each step. If you are missing a
part please call our toll-free number for assistance 1-866-567-4089.
WARNINGS:
•
Keep children and pets away from the trampoline enclosure during assembly.
•
Keep fingers away from the places where they can be pinched or trapped.
•
Do not attempt to assemble the trampoline enclosure if any parts are missing.
•
Adequate overhead clearance is essential. A minimum of 24ft (8m) from ground level is recommended.
Provide clearance for wires, tree limbs, and other possible hazards.
•
Lateral clearance is essential. Place the trampoline and trampoline enclosure away from walls, structures,
fences, and other play areas. Maintain a clear space on all sides of the trampoline with enclosure.
•
Place the trampoline on a level surface before use.
Step 1: Preparation
•
Place the assembled trampoline (without the frame pad) on a level surface.
Step 2: Assembling the supporting poles
•
Connect all six upper support poles (1) to the six lower support poles (5). Make sure that the locking
tabs “click” into the openings of the upper supporting poles (5).
Note:
All of the supporting poles come with pre-installed pole foams (2, 4).
Opening
Locking tab
084-0263-Cantire-14 ft Trampoline Enclosure-GB-01.indd 5
11-10-20 ��5:48
