11
ASSEMBLY
•
Repeat the steps above to attach all six Supporting Poles onto the vertical legs of the trampoline.
•
After completing the assembly, the Supporting Poles should look like the illustration below.
Step 11: Assembling the Enclosure Net
Note:
The edge with pre-sewn loops is the upper part of the Enclosure Net.
•
Locate a position for the entrance of the trampoline and hang the pre-sewn loop closest to the opening
onto the Ball Cap (2).
•
Hang the rest of the pre-sewn loops around the remaining five Ball Caps (2).
•
Attach the bottom end of the Enclosure Net (1) to the trampoline bed using the existing bed springs.
•
Align the eyelets of the Enclosure Net (1) with the V-rings of the bed and untie one of the springs using
the hook tool.
Note:
It is essential to select the closest eyelet to its respective V-ring. Even small
misalignments may cause problems with proper assembly.
084-0207-Cantire-8ft Trampoline Combo-GB-02.indd 11
11-11-9 ��4:12
