4
2.5 SAFETY ALERT DESCRIPTIONS
The following is a list of product safety alerts that appear in this section
and throughout this manual. You must read, understand, and pay heed
to these safety alerts before attempting to operate the product.
DANGER
: Fire and Explosion Hazard
Do not operate the Product in the presence of flammable
gases to avoid possible explosion or fire hazard.
CAUTION:
Temperature/Humidity/Pressure Extremes
Exposing the Product to extreme environmental conditions
outside of its operating parameters may compromise the
ability of the Product to function properly.
CAUTION:
Battery Disposal
Recycle or dispose of the battery in accordance with all
federal, state and local laws. To avoid fire and explosion
hazard, do not burn or incinerate the battery.
WARNING:
Use only Approved Equipment
Do not use batteries, gel, cables, or optional equipment other
than those approved by Jumper Medical Ultrasonic
Instrument Co., Ltd. which may cause the Product to function
improperly during a rescue.
CAUTION:
Possible Radio Frequency (RF) Susceptibility
RF susceptibility from cellular phones, CB radios and FM
2-way radio may cause interference with the product. Do not
operate wireless radiotelephones in the vicinity of the product
– turn power OFF to the radiotelephone and other like
equipment near the product.
WARNING:
Adjacent and/or Stacked Equipment
The Product should not be used adjacent to or stacked with
other equipment. If adjacent or stacked use is necessary,
the product should be observed to verify normal operation in
the configuration in which it will be used.
CAUTION:
Systems Statement
Equipment connected to the product must be certified to the
respective IEC Standards (i.e. IEC 60950 for data processing
equipment and IEC
601-1 for medical equipment).
Furthermore, all configurations shall comply with the system
standard IEC 601-1-1. Anybody who connects additional
equipment to the signal input part or signal output part
configures a medical system, and is therefore, responsible
