JUMO TYA S202, Operating Manual, Page: 9 / 99

V1.00/EN/00709725 [Thyristor power controller TYA S202] 9
1 Introduction
1.1 Preface
Read this operating manual before putting the device into service.
This operating manual is valid beginning with device software version
[256.04.01].
Keep the operating manual in a place that is accessible to all users at all times.
Your comments are appreciated and may assist us in improving this operating
manual.
Phone: +49 661 6003-727
Fax:
+49 661 6003-508
Service hotline For technical questions
Phone support in Germany:
Phone: +49 661 6003-9135
Fax:
+49 661 6003-881899
Email: service@jumo.net
Austria:
Phone: +43 1 610610
Fax:
+43 1 6106140
Email: info@jumo.at
Switzerland:
Phone: +41 1 928 24 44
Fax:
+41 1 928 24 48
Email: info@jumo.ch
A
The power controller produces the power that is needed at the analog input or
in manual mode. Safety systems independent of the power controller must be
installed. They should safely switch off the subsequent heating process in the
event of excess temperatures.
A
The power controller may only be operated using original JUMO semiconduc-
tor fuses.
In the event of replacement, please check that the correct spare part has been
used.
H
All necessary settings are described in this operating manual.
Manipulations not described in the operating manual or expressly forbidden
will jeopardize your warranty rights.
If you have any problems, please contact the nearest branch office or the head
office.
B