JUMO TYA S202, Operating Manual, Page: 35 / 99

V1.00/EN/00709725 [Thyristor power controller TYA S202] 35
3 Electrical connection
3.2.2 Type 709066/X-0X-100-0X-XXX-XX
Devices with a load current of 100 A are equipped with pluggable screw termi-
nals in the control section and cable lugs in the power section.
Master-slave
connection
Terminal Version Conductor cross
section Maximum
tightening torque
X2_1 and X2_2 Slotted screws, blade width 2 mm 0.2 to 1.5 mm
2
0.25 Nm
X3 Slotted screws, blade width 3 mm 0.2 to 2.5 mm2 0.5 Nm
U2, U1 M6 hex-headed screws, width across
flats 10 mm 16 to 50 mm
2
5 Nm
For applications according to UL, only 75 °C copper conductors may be used!
N/L2, V, L1 Slotted screws,
blade width 3 mm 0.5 to 4 mm
2
or
(0.5 to 2.5 mm
2
with ferrule)
for UL AWG 20-12
0.5 Nm
Ground terminal PE M6 setscrew with hexagon nut
Wrench size 10 mm Cable lug
drilled hole: 6 mm 5 Nm
Terminal Connection for
RJ 45 socket X8 Master-slave
The 1:1 patch cable (included in scope of delivery) must be plugged in for correct oper-
ation (X8 connection to slave).