JUMO mTRON B 70.4015.4, Installation Instructions Manual

Page: 27 / 40

5
1 Introduction
1.4 Type designation
The type code contains all factory-configured settings of the outputs (1) and
the supply (2). The supply voltage must correspond to the voltage shown on
the label. The label is affixed to the housing.
(1) Outputs
Standard version ..................................................................... . . .
Special version ....................................................................... 999
Factory configured to customer specification.
(2) Supply..................................................................................... . .
(1) (2)
704015/0- ... - . .
Outputs Code
4 relays (n.o. make) 154
4 logic outputs 12V 20 mA 165
4 solid-state relay outputs 250V 1A 170
Type Code
110 — 240 V AC +10/-15% 48 — 63Hz 23
20 — 53 V AC/DC 48 — 63 Hz 22