JUMO LOGOSCREEN 500, Operating Instructions Manual

Page: 62 / 100

4 Configuration parameters
60
4.2.7 Configuration - Outputs (option)
Start time
timed operation Configuration
➔
Meas. storage
➔
Timed operation
➔
Start time
any time Off when
start time =
end time
End time
timed operation Configuration
➔
Meas. storage
➔
Timed operation
➔
End time
any time
Stored value
timed operation Configuration
➔
Meas. storage
➔
Timed operation
➔
Stored value
Average val.,
Instant val
. ,
Minimum,
Maximum,
Peak value
v
Chapter 2.7 “Operating
modes”
Chapter 2.8 “Data
storage”
Storage rate
timed operation Configuration
➔
Meas. storage
➔
Timed operation
➔
Storage rate
1 — 5 — 32767s
v
Chapter 2.7 “Operating
modes”
Chapter 2.8 “Data
storage”
Parameter Value/selection Description
Action
outputs Configuration
➔
Outputs
➔
Relay K1
➔
Action
Off,
n.o. (make),
n.c. (break)
Operating signal
outputs Configuration
➔
Outputs
➔
Relay K1
➔
Operating signal
Off,
Logic inp1 — 4,
Logic channel 1 — 6,
Low alarm 1 — 6,
Low comb. alarm,
High alarm 1 — 6,
High comb. al.,
Counter/I al. 1 — 6,
C/I comb. al.,
Comb. alarm,
Memory al.,
Error ,
Modbus-Flag
The configured signal is
output to the relay.
Action
outputs Configuration
➔
Outputs
➔
Relay K2 — K3
➔
Action
Off ,
n.o. (make),
n.c. (break)
If n.o. (break) or n.o. (make)
is selected, the parameter
Outputs is automatically
set to Low alarm 1 or Low
alarm 2 .