JUMO exTHERM-DR, Operating Manual, Page: 37 / 100

6 ATEX ignition protection type "i" 37
Use of a probe with EPL "Gb" with a separation element (DIN EN 60079-26). The figure shows a probe with active zone sepa-
ration in accordance with DIN EN 60079-26. The terminal head must not be mounted in zone 0!
However, use in zone 0 is permitted below the separation element. The same requirements as in figure 7 apply for the zone
classification.
Figure 3:
A
The sensor technology specified in Chapter 10.14 Chapter 10.15 and Chapter 10.16 does not have zone separation.
v
Please also see the notes in Chapter 10.12. The type of zone separation as well as the cable selection must be im-
plemented or selected in such a way that the defined zone classifications and their requirements continue to be in place.