JUMO exTHERM-DR, Operating Manual, Page: 28 / 100

5 Startup of the device
28
5.3 Selecting and editing parameters
In the normal display, the values are switched using or and are only displayed.
To edit a value, for example here the setpoint value, carry out steps 1 to 4
5.4 Canceling edit
(EXIT) is used to cancel editing and the previous value remains.
1 Press The first menu item "Analog inputs" is highlight-
ed in black. The vertical line to the right shows
the current position in the menu.
2 Use to select the controller
Switch to submenu with
3 Press 1x until the setpoint value appears
Press (setpoint value flashes)
4 Set the value of your choice with or
Use to acknowledge
The value is adopted and saved.
Back to the normal display:
With (EXIT) or menu item "back" or automat-
ically after timeout
H
If no key is pressed for 30 seconds (timeout) then the device automatically returns to normal display and the value is
not stored. The duration of the timeout can be configured.
v
See Chapter "Bedienübersicht" on the first inner page of this manual