JUMO DICON 401, Operating Manual, Page: 39 / 100

39
7 Profile program editor
7.5 Deleting segments
When a segment is deleted, the subse-
quent segments move up and are auto-
matically renumbered. The profile will
change according to the preconfigured
setpoints.
h
Select “Delete segment”
h
Continue with
E
h
Enter the segment number of the
segment to be deleted
(in this case: 2)
h
Confirm with
E
7.6 Programming repeat cycles
A group of consecutive segments can be repeated up to 99 times or indefinite-
ly (input: -1). Repeat cycles are programmed in the menu of the last segment
in the group. The first segment of the group is defined in the setting “Target
segment”.
Example
A02 — A04 are to be repeated once.
h
Edit segment 4
h
Set the repeat cycles to “1”
h
Set the target segment to “2”