21
7 Electrical connection
7.2
Connecting the device
1. Insert the connecting cable into
the M12 plug connection.
2. Manually screw the union nut of
the connecting cable onto the
M12 plug connection on the de-
vice.
If you are using the connecting
cable provided by the manufac-
turer, tighten the union nut using
an open-end wrench AF 13.
Maximum tightening torque:
0.4 Nm.
3. Connect the connecting cable to the device that is processing the signals and to the voltage supply.
Route the cable so that it is protected against mechanical strain.
The device is ready for use. The device status LED indicates the current status of the device
and control elements", Page 22.
Summary of Contents for 406050
Page 2: ...Further information and downloads qr 406050 en jumo info...
Page 27: ......
