21
6 Device settings
Parameter "InP": selection of a measurand
✱
Select the desired measurand with the
and
keys:
✱
Press the
key to save the setting and move to the next parameter or
✱
press the
key to save the setting and move to the next submenu of the
setting menu or
✱
press the
key to save the setting, quit the device settings, and return to
measurement mode.
Parameters
(1)
"InP": selection of a measurand, see page 21
(2)
"C.tdS": conversion factor for TDS measurement, see page 22
(3)
"CELL Corr": setting the relative cell constant, see page 22
(4)
"rAnG": selection of the display range or the measuring range, see page 23
(5)
"CAL": preconfiguration for the calibration of the relative cell constant,
see page 23
(6)
"rEF.S": selection of the standard reference solution for the calibration of the
relative cell constant, see page 24
(7)
"Unit t": temperature unit °C/°F, see page 24
(8)
"t.Cor": setting the temperature compensation, see page 25
(9)
"t.Lin": compensation coefficient, see page 25
(10)
"t.rEF": setting the reference temperature, see page 26
(11)
"C.int": calibration timer, see page 26
(12)
"Auto HLD": automatic saving of a measured value, see page 27
(13)
"P.oFF": automatic device switch-off, see page 27
NOTE!
In the following list of parameters, the setting options for the default setting
are shown in bold in each case.
Menu/parameter
Setting option
Meaning
Cond
Conductivity
rESi
Specific electrical resistivity
tdS
Filtrate dry residue
SAL
Salinity (salt content)
SEt
Selection of the measurand in measure-
ment mode using the "Set" key
All manuals and user guides at all-guides.com
all-guides.com
