manualshive.com logo in svg

JUMO 202710/30, Operating Manual, Page: 26 / 44

Share
Download
JUMO 202710/30 Operating Manual Download Page 26

6  Device settings 

26

Parameter "t.rEF": setting the reference temperature

The parameter "t.rEF" can only be accessed if the setting option "Lin" or "nLF"
has been chosen when selecting the temperature compensation (t.Cor).

✱

Use the 

 and 

 keys to set the reference temperature:

✱

Press the 

 key to save the setting and move to the next parameter or

✱

press the 

 key to save the setting and move to the next submenu of the 

setting menu or

✱

press the 

 key to save the setting, quit the device settings, and return to 

measurement mode.

Parameter "C.int": calibration timer

✱

Use the 

 and 

 keys to set the calibration timer:

✱

Press the 

 key to save the setting and move to the next parameter or

✱

press the 

 key to save the setting and move to the next submenu of the 

setting menu or

✱

press the 

 key to save the setting, quit the device settings, and return to 

measurement mode.

Menu/parameter

Setting option

Meaning

25°C/77°F

Reference temperature 25°C/77°F

20°C/68°F

Reference temperature 20°C/68°F

Menu/parameter

Setting option

Meaning

1 to 730

Time interval for calibration timer in days

oFF

No calibration timer

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for 202710/30













































Reviews:

No comments