47
8.3. Start of a profile
1.
S xx.xx
P x.xx
2.
S 100.00
P xx.x
The start menu of the integrated programmer allows calling up
and defined starting of one of six previously stored
temperature profiles. The profiles are started manually or via
the integrated timer.
There are two possibilities for manually starting a
program:
1. Starting a profile from the OFF state:
The temperature system switches back to the OFF state at
the end of the program.
2. Starting a profile from the operating state.
The temperature system is started with the start key
,
and the bath is heated to the desired temperature, for
example 100 °C. At the end of the program, the
programmer switches to the operating state and holds the
bath temperature stable at 100.00 °C.
•
Press
enter
to select the submenu "Profile Start".
•
Use the up/down cursor keys
to select the
desired option.
A flashing segment indicates that a number needs to be
entered.
Start Profile
0 to 5
at Step
0 to 60
Loops
1 to 99
Enter the desired number and set each entry with enter
.
Start
no / yes (manual start)
or
time (via integrated timer)
A flashing line indicates that a parameter needs to be
entered.
Press the P-key
to select the respective parameter
and press enter
.
Summary of Contents for Presto Plus LH 47
Page 20: ...Operating controls and functional elements 20 Rear...
Page 41: ...41...
