Appendix
85
in_pv_06
Current pressure. EPROG input must be set to pressure
in_pv_07
Current flow. EPROG input must be set to flow
Setpoints and warning
limits
System response
in_sp_00
Set working temperature
in_sp_03
Set high temperature warning limit
in_sp_04
Set low temperature warning limit
in_sp_05
Working temperature set via EPROG
in_sp_06
Setpoint temperature set via watchdog function
in_sp_07
Set pump stage (1 … 4)
in_sp_10
Set actuating variable specification via serial interface
in_sp_11
Set temperature unit
0 = °C
1 = °F
in_sp_12
Set pressure unit:
0 = bar
1 = °F
in_sp_13
Set flow unit:
0 = l/min
1 = gpm
in_sp_27
Set pump setting
in_sp_28
High temperature alarm limit
in_sp_29
Low temperature alarm limit
Device modes
System response
in_mode_01
Return value 0. The value 0 stands for the control temperature
setpoint as only one temperature setpoint can be set (downward
compatibility for older devices)
in_mode_02
Selftune:
0 = Selftune disabled
2 = Selftune Enabled
in_mode_03
Operating mode setting for the EPROG input:
