Julabo Fusionchef pearl Operating Manual Download Page 36

Page: 36 / 43

Error messages

The following table contains some of the possible

error messages with the associated warning messages

and resolutions.
All warning messages are indicated on the display and

accompanied by an audible signal. To mute the audible
signal, press

once. The error message will still be

visible.

Error messages

When the following error messages appear, the unit

(heater and circulation pump) will shut off. You must

remove the cause of the problem before you can

switch the unit back on.

Shown on the display

What should I do?

E 01: LOW WATER LEVEL
ALARM

Not enough water in the bath tank.
Switch off the unit at the power switch, add
water, and switch it back on.
If there is enough water in the bath tank:
The float switch is defective (transport dam-
age, etc.). Sent the unit to an authorized

fu-

sionchef

by Julabo

repair facility.

E 05: WORKING SENSOR
ALARM

Please contact our service department.

E 06: SENSOR
DIFFERENCE ALARM

Please contact our service department.

E 07: INTERNAL HARD-
WARE ERROR

Please contact our service department.

Summary of Contents for Fusionchef pearl












































Search results

Summary of Contents for Fusionchef pearl

Reviews:

Related manuals for Fusionchef pearl

Brands by name

Popular brands

Julabo Fusionchef pearl, Operating Manual

Search results

Summary of Contents for Fusionchef pearl

Reviews:

Related manuals for Fusionchef pearl

Brands by name

Popular brands