Working with your Pearl
26
Working with your Pearl
Switching on and starting the unit
Caution!
Never operate a damaged or leaking unit!
Do not attempt to use the unit if the
power cord is damaged!
1. Use the power switch on the rear of the unit to
turn the unit on.
The unit will perform a self-test and then go into
Standby mode.
2. To start using the unit, i.e. to heat up to the tar-
get temperature, press and hold the
key for
at least 2 seconds. If you press and hold
again,
the
Pearl
will return to Standby mode.
As soon as you have started the unit, it will begin
approaching the target temperature.
Operating the unit
Basic operation of the unit is the same for all func-
tions:
Use the
arrow keys
to make adjust-
ments.
Confirm your selection by pressing
.
Setting the desired temperature
You can change the target temperature from the main
view while in standby or during regular operation.
1. Press the arrow keys
in order to change
the temperature.
