Cleaning / repairing the unit
14
7.
Cleaning / repairing the unit
Caution:
Always turn off the unit and disconnect the mains cable from the power
source before cleaning the unit.
Prevent humidity from entering into the circulator.
Service and repair work may be performed only by authorized electricians.
Cleaning:
Before opening and cleaning the unit, disconnect the power plug from the
mains socket!
•
Switch off the unit, disconnect mains power cable.
•
Remove the hood.
•
Clean the ribbed condensor with a vacuum cleaner.
•
Replace the hood.
•
Connect mains power cable and switch on the unit.
The unit is designed for continuous operation under normal conditions.
Periodic maintenance is not required.
Clean the outside of the unit using a wet cloth and low surface tension water
(e.g., soap suds).
Repairs:
Before asking for a service technician or returning a JULABO instrument for
repair, please contact an authorized JULABO service station.
When returning the unit:
•
Clean the unit in order to avoid any harm to the service personnel
•
Attach a short fault description.
•
When returning a unit, take care of careful and adequate packing.
JULABO is not responsible
