ENGLISH
107
C. Zone
settings
To program different zones in alert mode, follow the instructions below.
Buttons
Description
Note
1 (1234/4-
digit PIN
code)
+
You must be in standby
mode before you can
activate alert mode.
* How to check you are in standby mode:
Key in the factory-set PIN code 1 2 3 4 or your new 4-
digit PIN code.
Press .
The following appears on the Smart Panel:
(One beep indicates that you have entered a valid PIN code.
Three beeps indicate that you have entered an incorrect
code.)
2 4-digit PIN
code
+
Key in the 4-digit PIN
code for setting, followed
by
.
The following appears on the Smart Panel:
(One beep indicates that you have entered a valid PIN code.
Three beeps indicate that you have entered an incorrect
code.)
3
+
Press
and
to
activate alert mode.
Set the zones 1, 2, 3, 4, 5, 6, 7 and 8 to ON or OFF. If no
figure is displayed, the associated zone is OFF. The following
appears on the Smart Panel:
4
Press
to complete
the setting.
Confirm the setting and reset the Smart Panel to standby
mode by pressing
.
Home mode
Because the system has default settings on delivery, it can be used as soon as it has been unpacked.
These settings can be adapted to your requirements. In home mode, the system can be used in both
armed mode (ARM) and alert mode (ALERT) in different zones. The factory setting for home mode is
shown in the table below.
Sensor
Zone Status (operating mode)
Door/window sensor 1
ALERT
Door/window sensor 2
ALERT
Motion sensor
8
ARM