ENGLISH
9.
Spray detergent into the combustion chamber
and inner surface of the cylinder.
10.
Use a clean cloth to wipe the parts.
11. Refit the cylinder head, cylinder cover and
the gas cartridge cover. Screw the four M5
screws into the cylinder cover and then the
two M4 screws into the gas cartridge cover.
Tighten the four M5 screws in the cylinder
cover and then the two M4 screws in the gas
cartridge cover.
12. After 50,000 drive cycles or when the piston
is not able to return to the top position,
remove the snap ring and clean the area.
44
Summary of Contents for Meec TOOLS 071-032
Page 48: ......