EN
39
• Do not store the battery and charger in
places where the temperature can reach
over 40°C, for example, in a car parked in
the sun.
• Do not expose the power tool, charger or
battery to moisture.
4. Hold the hammer drill firmly and release
the power switch when the screw has
screwed in, otherwise the screw or screw
head can get damaged.
UNSCREWING
1. Set the direction of rotation to
anticlockwise.
2. Place the bit against the screw head.
3. Press the bit against the screw with a firm
pressure and unscrew the screw.
MAINTENANCE
Always remove the battery before doing any
work on the power tool.
• Clean the ventilation openings on the
power tool at regular intervals.
• Clean the power tool with a damp cloth.
Wipe dry afterwards.
NOTE:
Many detergents contain chemicals that can
corrode the plastic parts on the power tool.
Never use petrol, turps, thinner or other
similar products.
• Keep tools sharp and clean for better and
safer work.
• If a fault or malfunction occurs, have the
power tool checked by an authorised
service centre.
• Never open the power tool.
STORAGE
• When the power tool is not in use store it
in a dry and safe place with a temperature
of no more than 40°C and out of reach of
unauthorised persons.
Summary of Contents for Meec tools 012586
Page 4: ...1 1 2 3 4 5 6 7...