EN
36
Recycle as electrical waste.
TECHNICAL DATA
Rated voltage
18 VDC
Speed
0 – 300 / 0 – 1000 rpm
Stroke rate
0 – 5000 spm
Stroke length
26 mm
Capacity, concrete
20 mm
Capacity, steel
10 mm
Capacity, wood
20 mm
Chuck SDS+
Percussion force
1.2 J
Sound pressure level, LPA 84.3 dB(A), K=3 dB
Sound power level, LwA
95.3 dB(A), K=3 dB
Vibration*, a
h
,
HD
7.518 m/s², K=1.5 m/s²
Weight
1.7 kg
* When hammer drilling in concrete.
Always wear ear protection.
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 60745-2-6:2010.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
temperature indicated in the instructions.
Incorrect charging or charging outside the
given temperature range can damage the
battery and cause a fire.
SERVICE
• Power tools must only be serviced by
qualified personnel using identical spare
parts. This will ensure that the power tool
remains safe to use.
SPECIAL SAFETY INSTRUCTIONS
FOR HAMMER DRILLS
• Wear ear protection. High noise levels can
cause hearing impairment.
• Always use the supplied support handle.
Losing control of the power tool can result
in personal injury.
• Hold the tool in the insulated grips when
working where the it can come in contact
with concealed electric cables or the
power cord on the tool. Contact with a live
cable supplies voltage to the metal parts
on the tool and can give the user an
electric shock.
Symbols
The following symbols can be of importance
for how you should use your power tool.
Make sure you understand the symbols and
their significance.
Read the instructions.
Approved in accordance with
the relevant EU directives.
Summary of Contents for Meec tools 012586
Page 4: ...1 1 2 3 4 5 6 7...
