![Jula Meec tools 003-283 Operating Instructions Manual Download Page 42](http://html1.mh-extra.com/html/jula/meec-tools-003-283/meec-tools-003-283_operating-instructions-manual_2030252042.webp)
EN
43
DESCRIPTION
1. Quick chuck
2. Torque setting ring
3. LED light
4. Rotation selector
5. Power switch with speed control
6. Handle
7. Battery
8. Charger
FIG. 1
1. Charger connection
2. LED status lights
FIG. 2
USE
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to a power point.
3. A green light goes on when the charger is
connected to the mains and a flashing red
light indicates that the battery is charging.
The red status light stops flashing when
battery is fully charged, which takes about
3-5 minutes.
4. Pull out the plug after charging.
NOTE:
• Fully charge the battery before using it
for the first time. In order for the battery
to attain full capacity, it must be charged
and discharged several times.
• Avoid charging the battery for short
periods. Only charge the battery when it
is fully discharged.
• The adapter, charger and battery
become hot when charging.
This is quite normal.
WEEE symbol. End-of-life
electrical products must not
be discarded with household
waste. Recycle where possible.
Check with local authorities or
your local store for information
on recycling.
TECHNICAL DATA
Rated voltage
12 VDC
Drill diameter
0.8 - 10 mm
Speed
0 - 650 rpm
Sound power level LwA
94 dB(A), K= 3 dB
Sound pressure level LpA
83 dB(A), K= 3 dB
Vibration*
1.207 m/s², k=1.5m/s²
Vibration**
0.583 m/s², k=1.5m/s²
Charging time
3 - 5 h
Battery capacity
800 mAh
* Drilling in metal.
** Screw driving.
Wear ear protection.
Declared total vibration values are measured in
accordance with a standard test method, and
can be used for comparisons between tools.
The value may also be used for a preliminary
assessment of exposure.
WARNING!
• Vibration levels can deviate from the
declared value, depending on how the
tool is used.
• Suitable precautions for users must be
based on the actual conditions, taking
into account all parts of the operating
cycle, such as the time when the tool is
switched off and the idling time, in
addition to the time when the power
switch is pressed.
Summary of Contents for Meec tools 003-283
Page 4: ...1 1 2 3 4 5 6 7 2 8 2 1...
Page 5: ...1 2 3...