EN
38
correctly. The use of such
devices can reduce the risk of
dust-related problems.
Wear ear protection
• Using and looking after
power tools
• Do not force the drill driver.
Use the correct power tool
for the planned work.
• The drill driver does the job
better and safer when used
at the rate for which it was
designed.
• Do not use the drill driver if it
cannot be switched on and
off with the power switch.
Power tools that cannot be
controlled with the power
switch are dangerous and
must be repaired.
• Unplug the power cord and/
or remove the battery before
making any adjustments,
changing accessories or
putting the power tool away.
• These safety precautions
reduce the risk of accidently
starting the drill driver.
• Store power tools out of the
supply when the switch is in
the ON position, increases
the risk of accidents and
injuries.
• Remove Allen keys/spanners
etc. before starting the drill
driver. Allen keys, or the like,
left in a rotating part of a
power tool can cause
personal injury.
• Do not overreach. Always
maintain a firm footing and
good balance.
• This will ensure you have
better control over the drill
driver in unexpected
situations.
• Wear suitable clothing. Do
not wear loose-fitting
clothing or jewellery.
• Keep your hair, clothing and
gloves away from moving
parts.
• Loose-fitting clothing,
jewellery and long hair can
get caught in moving parts.
• If dust extraction and dust
collection equipment is
available, this should be
connected and used
Summary of Contents for Meec tools 003-283
Page 4: ...1 1 2 3 4 5 6 7 2 8 2 1...
Page 5: ...1 2 3...
