EN
41
charger free from dust and
dirt.
• Insert the battery in the
charger with the battery
terminals facing in the right
direction.
• Always remove the battery
before doing any work on the
drill driver.
• Cover the battery terminals
when the battery is not in
the drill driver, in order to
avoid a short-circuit.
• Do not discard batteries with
household waste, into a fire
or into water.
• Do not knock or open the
battery.
• Never allow the battery to
become completely
discharged. Charge the
battery regularly if it is not
being used for a long time.
Other risks
• Even if the drill driver is used
in accordance with the
instructions it is impossible
to rule out all risk factors.
The following are potential
plenty of water if you come
into contact with battery
fluid. Seek medical attention
if you get battery acid in your
eyes.
• Check that the mains voltage
corresponds to the rated
voltage on the type plate.
• Do not charge the battery in
the rain or in damp or wet
areas.
• The ambient temperature
must not exceed 40°C. Do
not expose the unit to direct
sunlight.
• Batteries that are defective
or damaged, or that cannot
be charged, must be
disposed of in accordance
with local regulations.
A damaged power cord must
be replaced by an authorised
service centre, or qualified
person, to ensure safe use.
• Repairs must only be carried
out by qualified personnel.
• Only use batteries
recommended by the
manufacturer.
• Keep the surface of the
Summary of Contents for Meec tools 003-283
Page 4: ...1 1 2 3 4 5 6 7 2 8 2 1...
Page 5: ...1 2 3...
