EN
65
5. Screw in the 5 screws holding the battery cover.
FIG. 34
Preparations for the mowing season
Before commissioning after winter storage, clean the charging plate and
pin with steel wool or fine sandpaper for best charging functionality.
Winter storage
The robotic lawn mower and the charging station should be stored in a dry
and safe place when not in use. The mains adapter and battery should be
stored indoors.
Preparations before winter storage
1. Clean the robotic lawn mower thoroughly.
2. Fully charge the battery.
3. Make sure the robotic lawn mower is switched off.
4. Disconnect the mains adapter from the mains.
5. Disconnect the mains adapter from the charging station.
6. Disconnect the border wire from the charging station.
7. Disconnect the charging station and put it away.
8. The border wire can be left out during the winter, but protect the
ends with waterproof tape or grease to prevent corrosion.
9. After cleaning and charging, store the robotic lawn mower standing
on the wheels in the packaging, or in a clean place in the garage.
We recommend taking the robotic lawn mower to an authorised service
centre before winter storage to have it checked, upgraded, and if necessary
repaired.
Summary of Contents for Meec tools 001-115
