ENGLISH
20
OPERATION
Functions and features
The refrigerator is environmentally friendly as a refrigerant is not used. No pollutants.
No moving parts, semiconductor-based cooling, no compressor (no compressor noise).
Low noise level, below 30 dB(A) during normal operations.
Accurate temperature control using linear regulation technique.
Straightforward design which simplifies repairs. The cooling system consists of a heating/cooling
transformer and a thermoelectric module.
The refrigerator can be used in bedrooms and other rooms in homes and in hotels, hospitals and
offices.
Before using the refrigerator
Clean the refrigerator thoroughly, especially inside. See the CLEANING section.
If the refrigerator's internal parts are not fitted in the right place, correct the refrigerator's fittings as
set out in DESCRIPTION.
About these Operating Instructions
These instructions are intended for users of the refrigerator. They describe the refrigerator and how it
should be used safely and correctly. The instructions cover several different models/types of refrigerator,
so the description of certain functions and accessories may not relate specifically to your refrigerator.
Energy saving tips
Try not to open the door too often, especially in wet or hot weather. When you open the door, close
it as soon as possible.
Occasionally check that there is sufficient air circulation around the refrigerator to provide requisite
ventilation.
Change the temperature settings from high positions (low temperature) to low positions when you
can (depending on the refrigerator load, ambient temperature, etc.).
Let food cool to room temperature before putting packages of freshly cooked food or other hot food
into the refrigerator.
Starting the refrigerator
1.
Wipe out the refrigerator. Wipe the exterior with a soft, dry cloth and the interior with a clean, damp
cloth.
2.
Plug the power cord into the power outlet.
3.
Set the temperature control to “5” or “Low”. Close the door and leave the refrigerator like this for
15-20 minutes.
Normal operation
The two LEDs on the temperature adjuster knob will
flash when the refrigerator is operating at full power.
The red LED light indicates that the mains power
supply is connected. The green LED (Temperature
Test Point) indicates the status of the cooling
system.
The fan in the refrigerator starts to work.
When you open the refrigerator door the interior
light comes on automatically.
LED Light
Test Point
Low
High
Adjustor Knob
Temperature
Temperature
