ENGLISH
13
Plumb function
Point the laser beam upwards to transfer points from the floor to the ceiling. Place the rotation laser
without tripod at the point to be transferred, start the laser, and mark the point shown on the ceiling.
Scanning
The rotation laser has a scanning function. This means that a laser line can be projected to a limited area,
making it easy to see the laser line. The scanning line can be set to three lengths.
1.
Start the laser.
2.
Press the scanning button (e). The laser projects a long scanning line.
3.
Press the scanning button (e) again if you want to project a medium-long scanning line.
4.
Press the scanning button (e) again if you want to project a short scanning line.
5.
Press the scanning button (e) again if you want to project a long scanning line again.
Laser sight
The laser sight makes it possible to use the laser even when the laser beam cannot be seen, for
example, when there is a lot of light.
Subject to printing errors and design changes over which we have no control. In the event of problems,
please contact our service department.
Jula Postorder AB, Box 363, SE-532 24 SKARA, SWEDEN
www.jula.se