ENGLISH
11
ENGLISH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use!
Never look into the laser beam. The supplied glasses are only intended to be used to increase the
contrast so that it is easier to see the laser beam.
The beam can cause permanent damage to the eyes. Never point the laser beam at people or
reflecting surfaces.
Keep the work area clean. Do not shake or knock the tool.
Do not expose the tool to rain or damp conditions.
Store the rotation laser in a safe, dry place.
Remove the batteries if the rotation laser is not going to be used for some time to prevent damage
from leaking batteries.
Before using the rotation laser, check that all the parts are undamaged. Only use the system if all
parts are working properly.
Repairs must only be carried out by qualified personnel.
Only use the rotation laser for the measurements described in the Operating Instructions.
Only use accessories that are specifically recommended to be used with the rotation laser.
It is prohibited to attempt to increase the laser power. We cannot assume liability for any damage
resulting from failure to follow the safety instructions.
The laser does not contain any parts that can be repaired. For this reason, never open the casing.
The warranty becomes void if the casing is opened.
Keep out of the reach of children.
IMPORTANT:
Laser radiation.
Do not look into the beam.
Laser class 2.
TECHNICAL DATA
Wavelength 635
nm
Maximum power
1 mW
Battery
2 x 1.5 V D
Measuring radius
Up to 15 m
Accuracy ±0.4
mm/m
Operating temperature
0°C-40°C
DESCRIPTION
A. Laser
opening
B. Spirit
bubbles
C. Power
switch
D. Rotation
button
E. Scanning
button
F. Levelling
screws
G. Battery
compartment
H. Base
plate
