– 9 –
2-4. Installing the power switch
1) Route the power switch and cable of blower
❸
from under the table stand.
❸
❸
Cable
Nut
Setscrew
2) Loosen the screws and the nuts attached to the
power switch. Put the nuts in the corresponding
holes in the aluminum frames and secure the
power switch to the aluminum frames of the table
stand with the screws and nuts.
Setscrew
Setscrew
Lid
Open
3) Loosen the setscrews of the cover of the power
switch of the sewing machine and the lid of the
cable gland. Open the switch cover to pull out
the switch.
Make a hole in the bottom of the power switch
box.
Cable gland
4) Put the cable gland located at the cable of the
blower power supply into the hole in the power
supply box.
