– 6 –
4) Put one end of pipe
(1.1 m) over the cylindri-
cal part of suction cover
and the other end
over the upper cylindrical part of filter box
❽
until
they will go further and secure both ends of the
pipe with pipe bands
.
Nut
Front cover of the table
stand
Setscrew
Mesh plate
(1.1m)
(1.1m)
Upper cylindrical part
❸
❸
5) Put one end of pipe
(0.9 m) over the cylin-
drical part of blower
❸
and the other end over
lower cylindrical part of filter box
❽
until they will
go no further and secure both ends of the pipe
with pipe bands
.
6) Remove the table stand cover. Loose the set
-
screws of the mesh plate.
There are nuts on the reverse side of
the table. Take care not to allow the
nuts to come off when you loosen the
screws.
7) Replace the setscrews of the mesh plate with
screws
. Secure suction cover
with screws
and the nuts.
(0.9m)
(0.9m)
Lower cylindrical part
