37
: There are three reinforcing modes: inverted joint, shrinkage joint and herringbone
joint. See 4.12 for details.
: Key to insert function code . See 4.13 for details.
: According to the set number of rows and columns and spacing, the alignment graph is
automatically copied.
Represents the direction and arrangement of array graphics.
In mode 1, the graph matrix is generated according to the set number of rows, row spacing,
column number and column spacing. The first point (X1, Y1) represents the offset of the initial position
of the array.
In mode 2, according to the number of rows, columns and array area, the row spacing and column
spacing are automatically calculated and the graph matrix is arrayed. The array region is the starting
position of the first (X1, Y1) array and the height and width of the second (X2, Y2) array. The two
points are diagonal vertices of the positive rectangle, and then the array region of the positive rectangle
is calculated.
In mode 3, according to the set number of rows, columns and array area, automatically calculate
row spacing and column spacing and array graphics matrix. The array region is the starting position of
the first (X1, Y1) array, the width and tilt angle of the second (X2, Y2) array, and the height of the
third (X3, Y3) rectangular region. The rectangular (rectangular or non-rectangular) array region is
calculated from the three points.
Note: Click 2 to switch different modes
