– 9 –
5) Connect motor output cord
6
to connector
!6
located on the sde of the box.
6) Connect connector 4P
!7
of the power swtch
to connector
!8
.
Route the motor output cord from
the front face of the box.
3) Close front cover
!5�
whle payng attenton to
pnchng of the wre.
Lghtly press porton
B
and nsert front cover
!5�
wth “clck”.
4) After that, fix it with the screw
!2
.
7) Make sure that the power swtch s turned
OFF and nsert power supply cord
@1
comng
from the power swtch nto the power plug
socket. (Illustraton s for the japanese
specification 100V type.)
1. Top end of power supply cord
varies in accordance with
destination or supply voltage.
Check again the supply voltage
and the voltage designated on
the control box when installing
the switch.
2. Prepare the power switch
conformed to the safety
standard.
3. Be sure to connect the ground
wire (green / yellow).
6
!6
!7
!8
@1
!5�
B
!2