– 121 –
8-6. Simple lock of the screen
Simple lock is activated by keeping
❶
held pressed for one second on the sewing
screen.
Pictograph display
❶
will be as shown below:
: Simple lock is enabled
: Simple lock is disabled
<Sewing screen>
* In the shipped state, simple lock of the operation panel is enabled automatically if no operation is carried
out for one minutes.
* The time to be elapsed until the simple lock is enabled can be set with the memory switch U402.
Refer to
"8-3-4. Setting the step from which cycle sewing pattern is started" p.108
Once the simple lock is enabled, operation of the buttons displayed on the screen is disabled, thereby pre-
venting maloperation.
❶
8-7. Version information
<Mode screen>
1. Press
❶
.
The "mode screen" is displayed.
2. Select the "6. Version".
The "version information screen" is dis-
played.
❶
❷
3. The screen returns to the previous screen
by pressing
❷
.
<Version information screen>
