JUKI DDL-9000C-F Series Instruction Manual Download Page 103

Page: 103 / 138

– 99 –

8-1-2. Copying a pattern

❶

2. Select the copy source pattern number from

list

❷

3. Press

❸

The "sewing pattern number copy screen" is

displayed.

❸

The selected pattern (sewing pattern and cycle pattern) can be copied to any other pattern of the specified

number.

* This operation is to be carried out under the maintenance personnel mode.

Explanation is given below using copying of a sewing pattern as an example.

①

Selecting the sewing pattern copy function

1. Press

❶

on the sewing screen un-

der the maintenance personnel mode.

The "sewing pattern number list screen" is

displayed.

<Sewing screen (Maintenance personnel mode)>

<Sewing pattern number list screen>

1. Enter the sewing pattern number to be reg-

istered using numeric keypad

❹

An unassigned registration number that

is closest to the entered value in the plus/
minus direction is displayed by pressing

❺

2. The created pattern is registered by press-

ing

❻

. Then, the current screen

returns to the "sewing pattern number list
screen". In the case the entered number
has already been registered, the prompt

message for overwrite confirmation is dis

played.

②

Select the copy destination pattern number

❹

❺

❻

<Sewing pattern number copy screen>

❷

Summary of Contents for DDL-9000C-F Series











































































































































Search results

Summary of Contents for DDL-9000C-F Series

Reviews:

Related manuals for DDL-9000C-F Series

Brands by name

Popular brands

JUKI DDL-9000C-F Series, Instruction Manual

Search results

Summary of Contents for DDL-9000C-F Series

Reviews:

Related manuals for DDL-9000C-F Series

Brands by name

Popular brands