– 1 –
No.
Application
APW-895
1
Sewing machine
LH-895 model of 2-needle, lockstitch machine with a center knife
2
Sewing speed
Max: 3,000 rpm
Lockstitch : 2.0 to 3.4mm (standard :2.5mm)
Condensation stitch : 0.5 to 1.5mm (standard : 1.0mm)
Back tuck stitch : 0.5 to 3.0mm (standard : 2.0mm)
Condensation/Back tuck stitch selectable
Parallel duble welt, parallel single welt
Each with flap or without flap
Possible to set in increments of 0.1mm ithin the range of 18mm (min.) to 220mm (max.) (Needle gage: 8 to 20mm)
Note that the pocket length is 35mm at the minimum when using the corner knife
5
(50mm in case of 14mm gauge or more and 21mm by adding a solenoid valve)
For the longer type (optonal), the maxmimum sewing length will be 250mm (Needle gage: 22 to 32mm)
(Possible up to 300mm wihiout entering corner knife)
Welting width
8, 10, 12, 14, 16, 18 and 20mm
(Needle gauge)
(Optional : 22, 24, 26, 28, 30 and 32mm)
7
Needles
ORGAN DP X 17 #14 to #18 (standard #16), SCHMETZ 190R #100 to #110 (standard #100)
8
Thread
Spun thread #60 (Recommended)
9
Hook
Vertical-axis 1.7-fold capacity hook
10
Thread take-up lever
Slide thread tak-up lever
11
Needle bar stroke
33.3mm
12
Cloth feed mechanism
Driver by stepping motor
13
Control
By a micro-computer
Machine operation is automatically stopped if the cloth feed mechanism error detector, the needle
thread breakage detector or anu of the various safety devices is actuated.
15
Lubricating oil
JUKI New Defrix Oil No. 1 (equivalent to ISO VG7)
16
Grease
1. JUKI Grease A. 2. JUKI Grease B
17
Operating air pressure
Standard : 0.5MPa
18
Air consumption
40dm
3
/min(ANR)
Dimensions of
Width: 1,095 mm Length: 1,500 mm Height: 1,200 mm
machine
(Width: 1,580 mm, including stacker) (Height: 1,800 mm, including thread stand)
20
Weight
238.5kg
21
Temperature: 5
°
C to 35
°
C, Humidity: 35 to 85% (no condensation)
1. Specifications
(1) Machinical specifications
3
Stitch length
4
Types of welt
Pocket lip length
(Welt length)
6
19
(2) Electric specifications
Once setting has been made, data can be retained (for 100 hours) by the built-in battery cell even after Power OFF
unless this setting is canceled, thanks to the function of the built-in microcomputer.
No.
Application
APW-895
1
No. of patterns for stored single sewing
99 (1 to 99)
2
No. of patterns for stored alternate sewing
20 (1 to 20)
3
No. of stored cycles
20 (1 to 20)
Single phase/3-phase 200 V, 220 V, 230 V, 240 V (option 380 V)
4
Input voltage/frequency
50/60 Hz
Power voltage fluctuation Rated voltage
±
10% or less
5
Power consumption
200VA
Model name
Item
Model name
Item
14
Safety mechanism
Working temperature/
humidity
Summary of Contents for APW-895
