JUKI APW-895, Engineer'S Manual

Page: 190 / 213

Error code Pict Description of error How to recover
E491 Corner knife length is too short. Possible to
When knife cannot be entered since the interval of corner knife is re-start after
short. reset.
E492 L size length is too short. Possible to
When sewing cannot be performed since the inputted L size re-start after
length is too short reset.
E493 L size length is too long. Possible to
When sewing cannot be performed since the inputted L size re-start after
length is too long. reset.
E494 Center knife length error Possible to
When center knife length is smaller than knife size of 6.7mm re-start after
reset.
E495 Length at sewing start/sewing end over Possible to
When sewing length is shorter than the total of length os each re-start after
condensation (back tuck) at sewing start and sewing end reset.
E496 Condensation at sewing end length over Possible to
When condensation pitch X number of stitches exceeds 15.0mm re-start after
reset.
E497 Back tuck at sewing end length over Possible to
When back tuck pitch X number of stitches exceeds 7.5mm re-start after
reset.
E498 Condensation at sewing start length over Possible to
When condensation pitch X number of stitches exceeds 15.0mm re-start after
reset.
E499 Back tuck at sewing start length over Possible to
When back tuck pitch X number of stitch exceeds 7.5mm re-start after
reset.
E702 CPU runaway detection Turn OFF the
When program abnormally has occurred in CPU power
– 185 –
7.5
mm
7.5
mm