– 45 –
①
Release the error
Press RESET button
A
to release the error.
When the error is reset, the thread trimming screen is dis-
played.
(2) To perform re-sewing from the start
②
Perform thread trimming
Press THREAD TRIM button
B
to perform thread trim-
ming.
When thread trimming is carried out, the sewing shape confir
-
mation screen is displayed.
③
Returning to the sewing start po-
sition
When FEEDING FRAME INITIAL
POSITION button
C
is pressed,
the sewing shape confirmation screen
is closed and the sewing screen is dis-
played. At this time, the feeding frame
returns to the sewing start position.
④
Perform again the sewing work
from the start
When the pedal is depressed, sewing
starts again.
2-4-9. Display of the flag during the change procedure
If the thread tension command or intermediate presser height increase/decrease value command for
the needle entry point in a user pattern or medium pattern is edited, it will be regarded as a temporary
change and will not be reflected to the original pattern. In this case, "*" (asterisk) mark is attached to the
pattern type display indicating that a change has been made.
If you try to select another pattern while the pattern type display is attached with "*" mark, "M523:
Changed content saving confirmation screen" will be displayed.
When ENTER button
is pressed, the changed content is cancelled or the newly selected pattern is
displayed after saving the changed content.
When CANCEL button
is pressed, changeover to the newly selected pattern is cancelled. In this
case, the screen returns to the previous screen.
A
B
C
