– 13 –
1.
It is recommended to change over the needle bar
position on the operation panel before threading
the needle to facilitate threading work. Refer to
"II-2-13. How the change over the needle bar
and thread presser to be threaded" p.48
for
how to change over the needle bar position.
2. It is recommended to change over the needle
presser bar position on the operation panel
before threading the thread presser section
to facilitate threading work. Refer to
How the change over the needle bar and thread
change over the needle presser bar position.
Thread
presser section
左糸
Right thread
Thread
presser bar
Pass the left thread through
the far side of the thread
presser bar.
Pass the right thread
through the near side of
the thread presser bar.
Left thread
3.
In the case using coated
thread, pass the threader of
the intermediate thread guide
without winding the thread on
the threader. By so doing, the
thread resistance is decreased.
When using a coated thread, thread the threaders of the
first and second thread guides without winding on them.
