– 49 –
2-13. How the change over the needle bar and thread presser to be threaded
②
Changing over the needle bar and the thread presser
The needle bar and the thread presser are changed over to the
left needle by pressing left needle select button
C
, or to
the right needle by pressing right needle select button
D
.
2-14. How to clamp the needle thread
①
Displaying the thread suction screen
Press thread suction button
A
on
the intermediate presser setting screen,
presser-down screen or shape check
screen to display the thread suction
screen. Then, thread suction is started.
②
Finishing thread clamping
Touch
B
the thread suction screen to finish thread clamping.
Then, the screen returns to the previous screen.
In the case such as after the completion of threading, the
thread end should be sucked for clamping.
"I-4-4. Procedure for clamping the needle thread"
* The thread suction button on the shape check screen is only
enabled while the presser foot is lowered.
E
F
D
C
A
B
Turn OFF the power before threading the machine head.
→
"I-4-3. How to needle thread the machine
Even if the needle is changed over on this screen, the selected
state of the needle will return to the needle used for sewing at
the time of moving to the sewing screen.
After threading the machine head, press thread suction button
E
to clamp the thread end. When you press threading
diagram button
F
, the threading diagram is displayed.
